Skip to content

Thin [Saver Applicator Terry] Microfiber Coating Applicator Sponge with Plastic Barrier - 12 pack


Notify me when back in stock

Saver Applicator Thin Microfiber Coating Sponge by Autofiber


The main complaint about microfiber applicators is the that they absorb too much product. Over the past few years, as expensive coatings have taken over the industry, the complain has only grown. Microfiber applicators make coating product application easier, quicker and more efficient, but coatings typically have a lower viscosity (not as thick - flow easier) so they soak through the microfiber to the sponge, wasting valuable product.

Our solution to this problem is the [Saver Applicator] wax sponge. We have added a layer of a hydrophobic material between the microfiber and sponge. This prevents excess coating product from soaking through the microfiber into the sponge. It also limits excess product buildup which can become gummy and tacky as the coating begins to cure.

These terry cloth applicator sponges are two-tone only to differentiate them from the standard microfiber applicators, which don’t have the product saver hydrophobic layer. The two sides function exactly the same.

These car wax applicator sponges are available in 3 sizes. If you're looking for something thicker, see our Thick Microfiber Applicator Sponge Pads.


These application sponges are the Thin - 5" x 3.5" x 1"


We also have a Velcro ergonomic car applicator with a handle to make handling the car wax and polish applicator sponges easier.


Article: Learn More about Ceramic Coating Applicators and Towels

 Add to cart or


*** Patent Pending ***