PDP [Iron+] Iron Remover

R400 Iron+

The First Iron Remover Without the Typical Sulfur Smell

R400 Iron+ is an innovative iron remover designed to safely and effectively eliminate embedded ferrous contamination from vehicle paint and exterior surfaces. Developed to improve the detailing experience, this advanced formula removes iron particles and brake dust without the harsh sulfur odor commonly associated with traditional iron removers.

Detailers can now perform paint decontamination and coating preparation without dealing with the strong, lingering smell that typically fills the workspace. Instead, Iron+ delivers powerful results with only a subtle, fresh scent.

Key Features

• Industry-first low-odor formula — no strong sulfur smell

• Iron-reactive catalyst turns contamination purple as it dissolves embedded particles

• Viscous formula allows longer working time with less runoff

• pH-neutral and safe for all exterior finishes

• Ideal for paint decontamination before polishing or ceramic coating

Directions for Use

1. Shake well before use.

2. Spray Iron+ directly onto the surface to be treated.

3. Allow 3–5 minutes of dwell time for the iron reaction to occur.

4. Watch as contaminants turn purple, indicating active removal.

5. Lightly agitate with a clay mitt if needed.

6. Rinse thoroughly with water.

The result is a clean, decontaminated surface ready for polishing or protection—without the unpleasant odor typically associated with iron removers.