Skip to content
Nasiol ZR53 - Car Nano Ceramic Coating and Paint Protection

Nasiol ZR53 - Car Nano Ceramic Coating and Paint Protection

by NASIOL
SKU N-151129
Save 15%
$126.00
$107.10

Notify me when back in stock

ZR53 – NANO LAYER CERAMIC COATING

50 mL | Durability: 3 Years (Up to 7 Years with Maintenance)

Experience professional-grade paint protection with Nasiol ZR53, a 10H nano ceramic coating that forms a durable, single-layer shield over your vehicle’s surface. ZR53 protects against scratches, UV rays, mud, ice, snow, and other harsh environmental elements, maintaining your car’s flawless appearance for years.

Key Features:

  • Certified 10H Hardness: Exceptional resistance to scratches and surface damage.

  • Long-Term Durability: Lasts up to 3 years, and up to 7 years with proper maintenance.

  • Crystal Gloss Reflection (CGR): Delivers a deep, mirror-like gloss with a smooth, silky finish.

  • Complete Kit Included: No additional tools required—everything you need is in the box.

  • Single-Layer Protection: One coating provides full coverage and long-lasting defense.

  • Trusted by Professionals: Designed for both experienced detailers and enthusiasts seeking premium results.

Application Instructions:

Nasiol ZR53 is suitable for both professional and personal use. Coating a mid-size vehicle typically takes 60–90 minutes. For optimal results, maintain application conditions at 5–30°C (41–86°F) and ~50% relative humidity (RH). Avoid direct sunlight and work only on cool surfaces.

  1. Surface Preparation:

    • Thoroughly wash the vehicle using Nasiol Cleanion Pro. Use a clay bar if necessary.

    • Polish or compound the surface using silicone- and wax-free products to remove imperfections.

    • Rinse and dry completely. Use compressed air to remove water from tight areas.

    • Wipe surfaces with Nasiol Clean to maximize coating adhesion and remove any residues.

  2. Application Process:

    • Wear the included nitrile gloves.

    • Wrap a suede cloth over the applicator block and replace every 3–4 panels.

    • Shake the bottle gently before use and apply 4–5 mL per 1 m².

    • Spread evenly in a crisscross motion.

    • Wait about 30 seconds for beading to appear, then wipe excess with the light gray microfiber cloth in straight motions.

    • Perform a final buff using the dark gray microfiber cloth in circular motions.

    • If the coating cures before wiping, remove it by polishing or sanding and reapply as needed.

  3. Curing & Aftercare:

    • Keep coated surfaces away from sunlight, moisture, and contaminants for 24 hours.

    • Allow 48 hours for full curing before washing with detergents or chemicals.